Diesel
F0281-0813
Engineered for superior performance, the F0281-0813 delivers 650 kWe of prime power with advanced turbocharged technology. This 6-cylinder 28.14L diesel engine combines high efficiency with robust construction for demanding power generation needs.
715 KW Power
Stage III
6 cylinder
Main technical parameters
The engine performance
Gross Engine Output 50Hz
Typical Generator Output 50Hz
Fuel consumption
Key Features
Main Features
✓ Compact design
✓ Good power density
✓ Good load acceptance
✓ Durability
✓ Easy service & maintenance
✓ Low fuel consumption
✓ Wide selection of optional equipment
✓ Low noise
✓ Tailored cooling pack
Standard scope of supply
✓ Cast iron cylinder block c/w separate cast iron cylinder head
✓ Aluminum alloy pistons with gallery oil cooling
✓ Automatic belt tensioner, Lift eyes, Fixed front suspension
✓ Radiator installed on the engine with mechanical pusher fan, thermostatically controlled
✓ Large capacity oil pan, spin-on full-flow oil filter, oil dipstick
✓ Fuel injection pump for high inject pressure, P-type injectors
✓ Duplex fine fuel filter c/w water separator
✓ Air inlet preheater
✓ Rear mounted air filter with restriction indicator
✓ 12V DC electric system with 3.7kW starter
✓ 35A charging alternator
✓ Heat isolated exhaust manifold
Dimensions & Weight
Dimensions & Weight
Including radiator (dry weight)
Power Definitions
Prime Power
In corporate to the prime rated power (PRP/DCP) of GB/T 2820 and ISO 8528, and refers to the maximum power available at the variable load series, without time limits in one year's running hours up to 250h and for every 12h running hours, it can be 10% overloaded for 1h for maintenance; overload power operation shall not be more than 25h in one year; the average output power within 24 h shall not be higher than 70% of the prime power.
Standby Power
In corporate to the standby power (ESP) of GB/T 2820 and ISO 8528, and refers to the maximum power available at a certain variable load series in the event of a utility power outage or under test conditions for an annual running hours up to 200h, of which the maximum running time shall be 50h per year. No overload is permitted by Yuchai. The allowed average output power within 24 h shall not be higher than 70% of the standby power.
Data Centre Power
It corresponds to the data center power (DCP) of GB/T 2820 and ISO 8528,and refers to the maximum power that the engine can provide for variable or continuous electrical loads under conditions of unlimited operating time, with the maintenance intervals and procedures being carried out as prescribed by FOGO. The generator unit is only applicable to the backup power supply of the data center. Prolonged operation at load in parallel with a utility is not permitted.
WARRANTY TERMS
GLOBAL COVERAGE
FOGO engines are secured by an international warranty: 4 years for Emergency Power Supply (EPS) and 2 years for Prime Rated Power (PRP). This is supported by our integrated service ecosystem featuring a digital parts platform and mobile workshops. For Data Center Power (DCP) clients, we guarantee parts availability for over 10 years or 50,000 operating hours.
