Diesel
F0523-2003
The F0523-2003 represents cutting-edge power generation technology with 1600 kWe of prime output capability. This 16-cylinder 52.3L engine features sophisticated water-air intercooling for optimal thermal efficiency and performance.
1805 KW Power
Stage III
16 cylinder
Main technical parameters
The engine performance
Gross Engine Output 50Hz
Typical Generator Output 50Hz
Fuel consumption
Key Features
Main Features
✓ Compact design
✓ Good power density
✓ Good load acceptance
✓ Durability
✓ Easy service & maintenance
✓ Low fuel consumption
✓ Wide selection of optional equipment
✓ Low noise
✓ Tailored cooling pack
Standard scope of supply
✓ Cast iron cylinder block c/w separate cast iron cylinder heads
✓ Aluminum alloy pistons with gallery oil cooling
✓ Automatic belt tensioner, Lift eyes, Fixed front & rear suspension
✓ Radiator with mechanical pusher fan, thermostatically controlled
✓ Large capacity oil pan, spin-on full-flow oil filter, oil dipstick
✓ High-pressure common rail
✓ ECU management/monitoring
✓ Duplex fine fuel filter c/w water separator
✓ Air inlet preheater
✓ Rear mounted turbochargers
✓ Top/Side mounted air filters with restriction indicator
✓ 24V DC electric system with two starters 8.5kW each
✓ 55A charging alternator
✓ Heat isolated exhaust manifold
Dimensions & Weight
Dimensions & Weight
Including radiator (dry weight)
Power Definitions
Prime Power
In corporate to the prime rated power (PRP/DCP) of GB/T 2820 and ISO 8528, and refers to the maximum power available at the variable load series, without time limits in one year's running hours up to 250h and for every 12h running hours, it can be 10% overloaded for 1h for maintenance; overload power operation shall not be more than 25h in one year; the average output power within 24 h shall not be higher than 70% of the prime power.
Standby Power
In corporate to the standby power (ESP) of GB/T 2820 and ISO 8528, and refers to the maximum power available at a certain variable load series in the event of a utility power outage or under test conditions for an annual running hours up to 200h, of which the maximum running time shall be 50h per year. No overload is permitted by Yuchai. The allowed average output power within 24 h shall not be higher than 70% of the standby power.
Data Centre Power
It corresponds to the data center power (DCP) of GB/T 2820 and ISO 8528,and refers to the maximum power that the engine can provide for variable or continuous electrical loads under conditions of unlimited operating time, with the maintenance intervals and procedures being carried out as prescribed by FOGO. The generator unit is only applicable to the backup power supply of the data center. Prolonged operation at load in parallel with a utility is not permitted.
WARRANTY TERMS
GLOBAL COVERAGE
FOGO engines are secured by an international warranty: 4 years for Emergency Power Supply (EPS) and 2 years for Prime Rated Power (PRP). This is supported by our integrated service ecosystem featuring a digital parts platform and mobile workshops. For Data Center Power (DCP) clients, we guarantee parts availability for over 10 years or 50,000 operating hours.
